• FAF2280 Series Tilting Check Valve consists a circular disc with con-ical rim, hinged about a fixed pivot above its center-line and offset from the plane of the seat, sealing against a body seat clamped be-tween the two sections of the valve body.

Tilting Check Valve

HS Code : 848130

Certificates : certificate certificate certificate

Product Details

Technicial Specifications

Other products

About the Company

Contact

*** Ensures 100% sealing with the “T” section ring fixed to the outer diameter of the disc fully facing the seat surface inside the body perimeter made of stainless steel welding.

***The sealing that can be made of EPDM, (NBR and VITON) optional materials can be dismantled and replaced easily on field conditions.

*** Inner and outer surfaces of the valve is coated with (250) microns thickness of fusion bonded epoxy. Higher thicknesses are available upon request.

*** Low moments are obtained by decreasing the friction through self lubricating bushings.

*** Can bear high stretching stresses on the pipeline through the ductile iron body and disc.

*** High impact resistance.

*** Pressure loss is at minimum level by double shaft design.

*** Counter valve weight allows installation of both horizontal and vertical pipes on the right and left sides of the mill, counterweight, and lever on both sides of the check valve.

*** The disc opens depending on the flow rate and moves freely depending on the flow.

*** The position adjusts to the working conditions through to the adjustable weight.

*** Lifting lugs and feet ease the balance during transport and installation.

*** Sealing gaskets made of EPDM, NBR or VITON supplied according to operating conditions and demand can be disassembled and replaced easily in field conditions.

*** With the o-rings on the bearing bushings, disc pin holes are protect-ed against corrosion (Dry shaft).

*** Retaining ring is assembled to the disc with imbues bolts, the disc is protected against corrosion by placing o-rings under the bolts.