Condenser
- Commercial Type Air Cooled Condensers
Condenser
HS Code : 841899
Certificates :
Product Details
Technicial Specifications
Other products
About the Company
Contact
Commercial Type Air Cooled Condensers
FEATURES AND APPLICATIONS
• Friterm FCV 3T series condensers are designed for outdoor installation including 2 different sound levels.
• The fans arranged in single rows from 1 to 3.
• Capacity range: 6.3÷ 69 kW.
Coil Block
• Staggered tube alignment,
• Internally grooved copper tubes specially for condensers, aluminium fins,
• 2,3 mm of standart fin pitch. Other fin pitches are optional,
• Circuit design are suitable for refrigerants R404A, R507, R134A, R407A and R407C. The mentioned catalogoue capacities are valid for R404A.
• Manifolds and inlet- outlet connections are copper. Schrader valve is supplied on inlet header.
• Standart Test Pressure: 34 bar (PED 2014/68/EU)
CASING
• Condensers have their own self supporting construction and do not require any extra accessories for installation on steel or concrete base.
• Polyester based electrostatically powder painted galvanized steel, which provides excellent UV and corrosion protection, is used for casing. Standard color is RAL 7044.
• Each fan chamber is separated by internal baffle plates to prevent induced windmilling of off-cycle fans
FANS
• Highly efficient axial EBM, ZIEHL-ABEGG or equivalent fans with diameters 350 mm, 400 mm, 450 mm, 500 mm are used in suction direction for condensers.
- (S) Standard,
- (L) Low
• 350/ 400/ 450 mm fans 230V 1~50Hz, 500 mm fan is 400V 3~50Hz, could be run at two different speeds. Furthermore, EC fans with speed control is optional.
• Variable fan speed regulation can be achieved by using three phase fans with frequency inverter and all pole sine filter, guard grilles of fans are standart.
• All motors feature internal protection. Protection class IP 44/ 54; insulation class B/ F.
• Ambient temperature range for outdoor operation is between -25°C and +50°C / +65°C. For standart fans, temperature for outdoor operation can be +75°C depending on the fan type and working conditions.
• Different fans and motors are optional for high working temperatures.
• Fans are running in a housing designed to maximize air flow rate.
• Friterm reserves the right to use fans of different manufacturers. Depending on the type, the fan data may slightly vary.
SOUND DATA
• Indicated sound pressure levels comply with EN 13487.
• Sound levels are obtained from sound power level data (LwA) of the fan manufacturers.
• Consult an expert for critical sound requirements.
OPTIONAL ACCESSORIES AND OTHER VARIANTS
• Other fin pitches are optional
• Other fin material options
- Coated aluminium fins
- Aluminium magnesium alloy fins
- Copper fins
• Complete epoxy coated coil
• Stainless steel casing
• Different color options for casing
• Different connection types
• EC fan
• Other fan and motor options for high working temperature.
• UV resistant safety switch
Friterm
FRITERM A.S. was founded in Istanbul in 1979. The company has developed its know-how and expertise by providing design, manufacturing, contract and sales services in Commercial Cooling, Industrial Cooling and Air Conditioning.
In time, Friterm has preferred to specialize on finned type heat exchangers and focused on the production of Air Cooled Condensers, Evaporators, Air Coolers, Dry Coolers, Water/Glycol Air Heaters and Coolers, Steam Heaters, Oil Coolers and Heat Recovery Coils for the Air Conditioning and Refrigeration Industry.
The company has included the energy sector in its fields of activity at the beginning of 2000s and expanded its product range. It has been designing and producing LT/HT Radiators, Combustion Turbine Inlet Air Cooling and Heating Units, Oil Coolers, Air Cooled ORC Condensers and Steam Condensers for the sector through its customized software.
CO2 Gas Coolers and Unit Coolers were added in the range in 2010 followed by Ammonia Evaporators and Condensers added in the product range in 2012 with the initiation of stainless steel pipe production. 2014 and 2015 were the years of transition of energy efficient, user friendly, high performing new generation Evaporators and Condensers.
FRITERM is at the disposal of the sector with its two manufacturing plants on an indoor area of 19,000 m2 in Tuzla - Istanbul with 246 competent staff and modern machinery park.
FRITERM will reinforce its role as a leading supplier in the Air Conditioning and Energy Sector with its New Facility at Makine Ihtisas Organized Industrial Zone built on an indoor area of 36,000 m2 over 60-decares of land, which will start to operate at the second quarter of 2016.
The Manufacturing and the Office Buildings have been designed to use natural resources such as solar and wind showing utmost attention to protect the environment to obtain the BREEAM certificate for the Manufacturing Building and the LEED Certificate for the Office Building.
Following the commissioning of the facility, the FRITERM ACADEMY, R&D and Lab in the Tuzla Facility activities will grow exponentially and FRITERM’s contribution to the science of Heat Transfer will increase.
