Name: Roof Top Air Conditioner
Brand: İmbat İklimlendirme ve Soğutma Sistemleri
Availability: InStock

Optional Features

Plate and rotary type heat recovery systems

Smoke detector

Hot water, vapour or electric heating

Gas burner heating

Ability to set the fresh air ratio between %0-100 % automatically

CO2 indoor air quality control

Three steps of filtration (G4+F7+F9)

Epoxy and hydrophilic coating on the evaporator and condenser coil surface

Condenser surface protection mesh

Water cooled condenser

Models suitable for extremely high ambient temperatures

Units with low noise levels

Ability to connect to building management system

Custom design for special project and flexible production

AC plug fan or radial fan models

Entalphy free cooling (economizer)

Inverter scroll compressors

Condenser fan speed control

Disinfectant UV-C ultrviolet light

Models with power exhaust fans

Thermal or Enthalpy Free-Cooling (Economizer)

It is standard in all models with dual-supply&return fans. The unit saves energy by using 100% fresh air when the outdoor temperature is low and the humidity is suitable.

Indoor Air Quality

The indoor air quality is protected by high efficiency filters, dirty filter alarm and CO2 sensors. The CO2 sensor works in coordination with the economiser and the fresh air intake is automatically decided.

Gas Burner

With the rooftop air conditioners with gas burner, independent heating is possible without the necessity of any connection to a central system, even at the lowest climates. Maximum efficiency is obtained with aluminized steel pipe heat exchanger and the gas burner capable of working between 17-55 mbar range.

Energy Efficiency

The rooftop units provide high performance levels with low energy consumption. All of our models are listed in the A or B energy class. Therefore İmbat Rooftop units provide energy efficiency for the establishment and in the long run, the World.

Thermodynamic Heat Recovery

Heat recovery is provided by transmitting all the exhaust air over the condenser. The air temperature entering the condenser is lower than the external air temperature; therefore the condensation temperature is low. This creates high compressor efficiency and up to 30% energy efficiency.

Asymmetrical Cooling

Is the application of using multiple capacity compressors on a single circuit cooling system.

Since multiple compressors at different capacities are connected to a single evaporator and condenser circuit. Under partial load, condensation is performed at low temperatures and evaporation is performed at high temperatures. In this system, 3 steps capacity control and up to 35% efficiency increase under partial load is obtained. Multiple compressor systems tend to have a longer lifespan and energy saving features due to its step capacity control abilities. In only a very small amount of time the units operate at maximum capacity. Thus, asymmetric cooling application is vital for energy efficiency.

Dual Skin Galvanised Body

Unit body is stone wool isolated and is in between two galvanized metal sheet surfaces. The outer body is electrostatically painted and galvanised. The insulated double galvanised surface provides low heat loss, long life, durability and fire endurance.

İmbat İklimlendirme ve Soğutma Sistemleri

Year 1991… İmbat breeze hits Izmir for the first time. We took our first steps with the strength from our crew and an unsatisfiable hunger for knowledge. We reached remote corners of the country and then the World in with our industrial cooling and climatization production. We spent years on this journey. We grew into an adolescent throughout. One thing we have not lost along the way was the excitement of our very first step. We became the face behind many firsts in the country. We became one of the few experts in the sector with our innovative solutions and quality. Year 2021… We are proud to stand before you with 30 years of intense experience, knowledge and excitement. We are getting stronger each day, carrying our spirit and values worldwide.

"Creating a better world" is our philosophy. Therefore, we believe it's important to use our limited natural resources properly and we develop products that help the continuity of healthy living. We believe that right solutions and the proper use of efficient technology is the answer to genuine efficiency. Our R&D and Product Development sections are given the priority on their work on efficiency. We develop high performance and low energy consuming units with original designs that provide project-specific solutions. We believe that by introducing such energy efficient units to the market, we are doing our part with the environment. We can ‘create a better world’ with right solutions and innovative ideas.