Heat Exchanger

KUBUŞ KEJ SERIES, EXCHANGER - HEAT EXCHANGER.

• TO OBTAIN HOT WATER FROM STEAM OR HOT WATER, COUNTER-CURRENT, BODY MADE FROM FE37 MATERIAL, COPPER PIPE ACCORDING TO TS-443 AT LEAST 1 MM. IT IS SERPENTINE IN THE THICKNESS OF FOOD.

• IN ORDER TO DISASSEMBLE THE SERPENTI, THERE IS A MIRROR COMPRESSED WITH BOLT AND GASKET BETWEEN TWO RING FLANGES.

• CONTROL AND SAFETY DEVICES AND FILLING AND DRAINING TAP CONNECTION PORTS ARE AVAILABLE.

• ONE OR TWO FEETS OF THE SUITABLE CONSTRUCTION OF THE REQUIRED HEIGHT ARE FIXED ON THE BASE MADE OF 250-DOSE CONCRETE WITH SUITABLE STUDS.

• THE EXTERIOR IS INSULATED WITH 90 KG/M3 DENSITY, 5 CM THICKNESS WITH STONE LUNIO MATTRESS SEWED TO RABITZ WIRE (CHLORINE CONTENT <10PPM).

• AT LEAST 0.5 MM ON INSULATION. SHIRT IS MADE WITH GALVANIZED SHEET OF THICKNESS.

• NON-GALVANIZED PARTS ARE PAINTED WITH 2 COLORS OF FLAMMABLE PAINT AND ARE SUPPLIED AND INSTALLATION IN THE WORKPLACE. (EXTERNAL DIAMETER IS BASED ON THE HEATING AREA CALCULATION)

• FOR 4 ATMOSPHERES AND LOWER PRESSURE STEAM EXCHANGER OF THE SAME QUALITY AND IN THE SERPENTINE AREA, A 10% MORE PRICE IS APPLIED, ON THE PROVISION THAT IT CONTAINS THE REQUIRED VAPORATING AREA AND THE REQUIRED STEAM DOOM.

IF REQUESTED U TYPE ETC. IT IS ALSO MANUFACTURED.