Cooling Tower

Axial Fan Closed Circuit Water Cooling Towers are used in refrigeration and cooling systems and also to remove Access heat from power and heat generating systems. Wet Water Cooling Towers, environmental air and hot water from the utilization site enter the system, some of the water evaporated and cooled remaining water and air stream. The minimum water temperature can be achieved by this system is saturated air or wet bulb temperature. Due To Water Quality Problems on system cooling water, closed circuit water cooling can be desired. To Achieve This, heat can be extracted from cooling tower by a heat exchanger located inside cooling tower.

KURUMAN-AKSK type cooling tower fill be called as Axial fan draft closed circuit water cooling tower with tube heat exchangers. A tube heat exchanger is used inside of the cooling tower. Wet air and wet air cooled water passed through the pipes and cooled down the closed circuit water inside the-pipes. As catalog value wet bulb temperature is taken as 24 C, and dry bulb temperature is taken as 34 C( % 43.8 relative humidity). Water inlet andexittemperaturesaretaken as 34-29 C.

Heat Exchanger: Standard Material For Heat Exchanger is copper to get best heat transfer characteristics. Other materials can be used if customer request.

Body: Body is made of GALVALUM steel painted and furnace dried as standard, if customer required it can be manufactured from 304 or 316 stainless steel.

Supporting platform: Made from NPU profile. It is design to support additional transportation loads as well. Axial Fan: It is located at the top of the tower together with driving electrical motor. It could be one or more units depend on airflow requirements of the tower. Sound pressure levels of these fans are more than radial equivalents but price are much cheaper.

Filling material: In Order To İncrease Performance of cooling tower, air-water contact surface should be maximizing. Filling material helps to achieve this by increasing air turbulence and breaking down water particles. Film or splash type filling material can be used in our designs

Mist eliminators: In Order To Eliminate Liquid Water Particles To be carried by exhaust air mist eliminators are used at exhaust site. They're Made of PVC or GALVALUM steel plates. Standards profile is V profile, but if desired by customers M profile can also be used.

Water inlet/exit: standard connection screw type, flange connection can be used if required. Inlet of hot water to the tower trough holes on the inlet manifold. Spray Nozzle Systems can be added by customer request.

Water Feeding And Discharge Systems: standard connection screw type, flange connection can be used if required. Tower Circulation Pump And Piping: pump selected for standard conditions and pipe connections are given as a part of the system, if different operating conditions can be requested by the customer, systems can be adapted for requested conditions.

Axial Fan Closed Circuit Water Cooling Towers are used in refrigeration and cooling systems and also to remove Access heat from power and heat generating systems. Wet Water Cooling Towers, environmental air and hot water from the utilization site enter the system, some of the water evaporated and cooled remaining water and air stream. The minimum water temperature can be achieved by this system is saturated air or wet bulb temperature. Due To Water Quality Problems on system cooling water, closed circuit water cooling can be desired. To Achieve This, heat can be extracted from cooling tower by a heat exchanger located inside cooling tower.

KURUMAN-AKSK type cooling tower fill be called as Axial fan draft closed circuit water cooling tower with tube heat exchangers. A tube heat exchanger is used inside of the cooling tower. Wet air and wet air cooled water passed through the pipes and cooled down the closed circuit water inside the-pipes. As catalog value wet bulb temperature is taken as 24 C, and dry bulb temperature is taken as 34 C( % 43.8 relative humidity). Water inlet andexittemperaturesaretaken as 34-29 C.

Heat Exchanger: Standard Material For Heat Exchanger is copper to get best heat transfer characteristics. Other materials can be used if customer request.

Body: Body is made of GALVALUM steel painted and furnace dried as standard, if customer required it can be manufactured from 304 or 316 stainless steel.

Supporting platform: Made from NPU profile. It is design to support additional transportation loads as well. Axial Fan: It is located at the top of the tower together with driving electrical motor. It could be one or more units depend on airflow requirements of the tower. Sound pressure levels of these fans are more than radial equivalents but price are much cheaper.

Filling material: In Order To İncrease Performance of cooling tower, air-water contact surface should be maximizing. Filling material helps to achieve this by increasing air turbulence and breaking down water particles. Film or splash type filling material can be used in our designs

Mist eliminators: In Order To Eliminate Liquid Water Particles To be carried by exhaust air mist eliminators are used at exhaust site. They're Made of PVC or GALVALUM steel plates. Standards profile is V profile, but if desired by customers M profile can also be used.

Water inlet/exit: standard connection screw type, flange connection can be used if required. Inlet of hot water to the tower trough holes on the inlet manifold. Spray Nozzle Systems can be added by customer request.

Water Feeding And Discharge Systems: standard connection screw type, flange connection can be used if required. Tower Circulation Pump And Piping: pump selected for standard conditions and pipe connections are given as a part of the system, if different operating conditions can be requested by the customer, systems can be adapted for requested conditions.