Dismantling Joint

DENZ D10 Dismantling Joint’s are doubleflanged fitting that can be adjusted longitudinally in flanged pipe systems (+/- 25 mm from the middle position). In addition to providing a simple method for installing and removing flanged valves, Dismantling Joints are also suitable for subsequent maintenance. Water treatment, sewage treatment, power generation, and pumping stations are among the most common applications.

• Designed with three flanges, the center flange compresses

the seal through the rods. The flanges are connected by

tightening rods.

• Suitable for both standard and non-standard applications.

• Full restrained double flanged type

• Simple installation, requires only a spanner and torque

wrench to fasten the stainless steel or high tensile galvanized

steel tie bars.

• The combination of a flange adaptor, a flanged spigot, and

tie bars in an integrated assembly provides adjustability.

• Axial Displacement: +- 25mm

• Simple and practical valve installation makes for an easy

installation process.

• As studs separate from the tie rods compress the gasket,

smaller diameter connecting bolts can be used, making it

easier for workers to work on the installation.

• Due to the typical longitudinal adjustability of 25 mm, it

is simple to install and remove and provides ideal support

during the installation and removal of valves.

• Certain dismantling joint designs can also be used in flexible

pipelines without any limitation.

• The Ductile Iron Body is highly durable against the strong

stress that may occur in the pipelines.

• Optionally in Full Stainless Steel for mainly sea-water

applications

• On request, larger nominal sizes, greater pressure ratings,

and unusual construction lengths are also available.

• Any Connection Flange Standards are applicable on request

• Tolerance for angular misalignment

• Allows to maintain isolation valves, control valves, check

valves, non-return valves, flow metering valves, pump sets,

pressure reducing valves, flanged pipe and fittings etc.

• Highly simplifies Future pipework connections.

• When dismantling joints are ordered with valves or check

valves, the dismantling joints will be shipped mounted on

the valves. As a result, field teams will have an easier time

assembling the products.