Resilient Seated Gate Valve
- G10 Resilient Seated Gate Valve | Non Rising Stem F4
- DENZ-G10 Resilient Seated Non-Rising Stem Gate Valves are suitable for use with water and waste water for both above ground and underground applications. The valve is designed with a bolted cover connection. It is made of premium materials and has a special coating that can be rotated clockwise or counterclockwise. Suitable for domestic water system, water supply and drainage system, sewage treatment system, chemical fluid transportation systems. It can be used as a cut-off device on fluid pipelines in construction, urban environmental protection, petrochemical, pharmaceutical, food, metallurgy, textile, power and other industries.
Product Details
Technicial Specifications
Other products
About the Company
Contact
DENZ-G10 Resilient Seated Non-Rising Stem Gate Valves are suitable for use with water and waste water for both above ground and underground applications. The valve is designed with a bolted cover connection. It is made of premium materials and has a special coating that can be rotated clockwise or counterclockwise. Suitable for domestic water system, water supply and drainage system, sewage treatment system, chemical fluid transportation systems. It can be used as a cut-off device on fluid pipelines in construction, urban environmental protection, petrochemical, pharmaceutical, food, metallurgy, textile, power and other industries.
• Ductile iron body and bonnet for high
strength and impact resistance
• Ductile iron gate fully encapsulated in EPDM to ensure
drop tight sealing
• Fully EPDM or NBR vulcanised wedge maintains a
complete block of flow and can absorb small particles
in the flow.
• Higher durability is ensured by multi-stem O-rings that
do not require maintenance and are corrosion-resistant.
• There is no corrosion risk associated with isolated
bonnet nuts
• It is possible to use it in both directions. The valve can be
installed horizontally or vertically with a variety of flow
directions
• AISI420 stainless steel spindle for high strength and
corrosion resistance
• Design of a valve that does not require maintenance
• Back seal facility to allow for replacement of seals under full operating pressure
• The precise machined stem ensures a low torque requirement during operation due to the precision of
the stem.
• Potable water applications are available with WRAS-approved coating upon request.
• It is easier to transport and install large valves with balanced lifting holes on the body.
• Fusion bonded epoxy coating for long life corrosion protection
• Straight through full bore to avoid debris traps
• Isolated fasteners for corrosion protection
• Anti-friction thrust washer for low operating torques
• Integral cast-in feet for safe and easy storage
• Direction of closure
Anticlockwise closing or clockwise closing available
• Clockwise closing available
• Hydrostatic test pressure for seat: PN x 1.1 , for shell: PN x 1.5 according to EN 12266-1.