Aspirator

M-HA Metal Oil Filter Cell Kitchen Aspirator inner surface is made of high quality corrosion resistant galvanized steel and outer surface is made of oven-painted sheet on high quality galvanized steel. The fans are radial fans with directly coupled backward curved blades. Thanks to the fact that the engine is out of the air flow, the hot air exhausted from the hood is prevented from damaging the engine. Thanks to the G2 Metal Oil Filter used, the oil particles in the air exhausted from the hood are filtered. The M-HA series is the ideal choice for high performance and trouble-free operation.

This product is suitable for use in kitchen hood ventilation systems in businesses such as hotels, restaurants and cafes. It is generally used as washable dust and grease trap panel filters in ventilation systems and especially in kitchen hoods. It is manufactured from galvanized sheet, aluminum or stainless metal frame, and fine-pored metal mesh is used as filter material. Metal mesh wire used as filter material provides long service life and high dust holding capacity. It is in the G2 category as the Filter Efficiency Class.

The product advantages are many. Adsorption of harmful solvents, low accumulation amount in high temperature and harsh system conditions due to wide filtration area, leakproof structure are just a few of these advantages. The active carbon compact filters included in the product create a high filtration area compared to its dimensions, allowing economic filtration due to its long service life. Synthetic filter material impregnated with activated carbon is pleated and turned into a product. Easily fits into standard compact filter cases. However, it can also be supplied as cartridges and cylindrical in different dimensions. Activated Carbon-impregnated sponge filters; They are converted into products in the form of cassette filters in standard and special sizes, without pleats or by pleating in areas where higher filtration area is required. Depending on the system requirement, filters are produced in cylindrical form using Granular Activated Carbon.

G2 Metal Oil Filters have a wide usage network. They are used as pre-filters before fume trap filters. They take part in air filtration in corrosive environments. They play an active role in keeping grease and sparks and separating oil vapors. They are especially preferred in industrial kitchen ventilation, restaurants, canteens, in short, in systems that require hygienic air. It is also used as a front grease trap in the ventilation system.

It is used as washable dust and grease trap panel filters in ventilation systems and especially in kitchen hoods. It is manufactured from galvanized sheet, aluminum or stainless metal frame, and fine-pored metal mesh is used as filter material. Metal mesh wire used as filter material provides long service life and high dust holding capacity.

M-HA Metal Oil Filter Cell Kitchen Aspirator Technical Data

M-HA series cell kitchen aspirators keep the oil and soot particles in the suction air and clean the air to be thrown into the atmosphere, thanks to the G2 metal grease trap filter at the entrance and optional electrostatic, odor-retaining cylindrical activated carbon, granular and UV filters. The cell panels are 50mm thick, insulated with stone face, the outer wall is made of 0.8mm painted sheet metal, and the inner wall is made of 1mm corrosion-resistant high quality galvanized steel. The fans used are radial fans with directly coupled backward curved blades.

The engine has been taken into a separate cell so that it will not be affected by the suction air. In this way, the engine is protected from oily and hot air. Thus, the working life of the device is increased and the possible risk of fire is eliminated. It is used to exhaust the hot, oily air that comes out during cooking in cooking areas in industrial kitchens, restaurants, hotels, shopping malls.

M-HA Metal Oil Filter Cell Kitchen Aspirator Models

M-HA 250 Model

• Voltage 380 V
• Frequency 50 Hz
• Power 0,37 kW
• Cycle 1360 d/d
• Weight 115 kg

M-HA 280 Model

• Voltage 380 V
• Frequency 50 Hz
• Power 0,55 kW
• Cycle 1370 d/d
• Weight 128 kg

M-HA 315 Model

• Voltage 380 V
• Frequency 50 Hz
• Power 1,1 kW
• Cycle 1390 d/d
• Weight 180 kg

M-HA 355 Model

• Voltage 380 V
• Frequency 50 Hz
• Power 2,2 kW
• Cycle 1420 d/d
• Weight 235 kg

M-HA 400 Model

• Voltage 380 V
• Frequency 50 Hz
• Power 4 kW
• Cycle 1430 d/d
• Weight 260 kg

M-HA 450 A Model

• Voltage 380 V
• Frequency 50 Hz
• Power 5,5 kW
• Cycle 1440 d/d
• Weight 385 kg

M-HA 450 B Model

• Voltage 380 V
• Frequency 50 Hz
• Power 7,5 kW
• Cycle 1450 d/d
• Weight 450 kg  

The product has double walled cell structure. Insulation with 50 mm thickness rockwool. Outer sheet is 0,8 mm painted galvanized, Inner sheet is 1 mm galvanized sheet. Motors are three-phase,have IP55 and Class F insulation The motor is out of the airflow. G2 metal filter on the suction side.